| Kirkham 427 Manual | Table of Contents |
|---|
Oil Vapor Separator Tank
Parts:
- oil vapor separator tank
- 1/4-20 x 1/2” bolt(3)
- 1/4” washer (3)
- OVST cap & gasket
- ratchet
- 7/16” socket
.jpg)
This is a view from inside the cockpit, looking up at the firewall. The top section is the cowl and the writing is on the cockpit side of the firewall. The three bolts are screwed into the back side of the OVST.
.jpg)
The OVST as seen from the engine compartment. The tank bolts on to the firewall, the bolts fastening from inside the engine compartment. The tank has threaded holes.
To fit the cap, simply insert the gasket into the cap, and screw it down. The OVST cap is identical to the brake reservoir caps.
Back one page
Req. from 38.107.191.100 on Thursday, 09-Sep-2010 19:14:22 GMT
Change date: Monday, 02-Jul-2007 20:58:32 MDT
Kirkham Motorsports - Ph: 801-377-8224 - sales@kirkhammotorsports.com
Copyright © Kirkham Motorsports