| Kirkham 427 Manual | Table of Contents |
|---|
Rectangular Rear View Mirror
-
Parts:
- street (rectangular) mirror
- 10-32 x 3/4” oval head screws (2)
- 3/16” washer (2)
- 3/16” jet nut
-
Tools:
- screwdriver
- ratchet
- 1/4” socket
.jpg)
.jpg)
Rectangle (street style) mirror: Just bolt it on like in the picture. Keep in mind when you drill that it should be offset 1 3/8” towards the passenger side of the car.
Originally, these were slot head screws, but using phillips head screws reduces the chance of accidental damage.
Round Rear View Mirror
-
Parts:
- competition (round) mirror
- bracket
- 10-32 x 3/4” oval head screws (2)
- 3/16” washer (2)
- 3/16” jet nut
- 1/4-20 acorn nut
-
Tools:
- screwdriver
- ratchet
- 1/4” socket
- 7/16” wrench
.jpg)
.jpg)
- Drill the holes in the same spot as you would with the rectangle mirror
- Bolt the bracket on to the cowl.
- Put the mirror on.
- While tightening the nylock nut, pull up on the mirror to get the stud to catch
- Finally, spin and tighten the acorn nut on the end of the stud.
Originally, these were slot head screws, but using phillips head screws reduces the chance of accidental damage.
Back one page
Req. from 38.107.191.103 on Thursday, 09-Sep-2010 20:09:33 GMT
Change date: Monday, 02-Jul-2007 20:59:06 MDT
Kirkham Motorsports - Ph: 801-377-8224 - sales@kirkhammotorsports.com
Copyright © Kirkham Motorsports